(see our newer website )


Chocolate Stone Melangers, Nut Butter Grinders and an exciting world of speciality appliances!      Imagine the Possibilities ...


# Instructions for changing/replacing Fan


  1. As with all electrical appliances, remove the connection to the wall socket.
  2. Setup unit in a comfortable work area as the unit is heavy to work with.
  3. Place a clean material (such as paper or cloth) on the work area to prevent scratches to the body of the unit.
  4. Use the services of a professional electrician or mechanic, or an authorized service personnel if necessary.
  5. Remove the heavy rollers stones and the drum unit aside.
  6. Ensure that the machine has not been running and the motor is not hot, prior to opening up the unit.


  1. Place the unit upside down and remove the screws at the bottom of the unit.
  2. Holding the top and bottom parts of the unit firmly, turn the unit over and place it on the work top in normal position.
  3. With a screw driver, gently pry the plastic lock around the spindle as shown in the picture below.


After the lock is removed, remove the top cover of the unit and set nearby on the work top, as shown in picture below.






Using two screwdrivers, gently pry away the motor fan from the motor shaft as show below.  


5 After removing the fan, install a new fan, ensuring the blades point downwards, by gently tapping with a small hammer on the fan.


6 Replace the top cover and screw back on the screws at the bottom of the unit.

Please call or email us if you need anything that you do not find above.   


Copyright 2009 Spectra. All rights reserved