Increasing Gap between Drum and Scrapper Arm
with all electrical appliances, remove the connection to the wall
unit in a comfortable work area as the unit is heavy to work with.
a clean material (such as paper or cloth) on the work area to prevent
scratches to the body of the unit.
the services of a professional electrician or mechanic, or an
authorized service personnel if necessary.
the heavy rollers stones and the drum unit aside.
that the machine has not been running and the motor is not hot, prior
to opening up the unit.
As seen in image 1 below, the scrapper arm touches the drum wall. In
this case, the adjustment should be made to move the scrapper arm away
from the drum.
Using a spanner, loosen the lock nut as shown in image below.
Turn the Scrapper Arm itself, rotating clockwise, by 360 degrees, that
is, by one compelete turn. You can repeat it for another turn if
necessary, ensuring that the plastic scrapper arm is back at vertical at
its final stop position.
Tighten back the Lock Nut using a
spanner, and place the assembly back into the drum.
Now you should have an increased
gap between the drum and the plastic portion of the scrapper arm.
Please email us if you need further
Copyright © 2014 Spectra. All rights reserved